Building Optical Glass Series Testing Equipment
1、Product introduction
It is suitable for tensile, compression, bending, shearing, stripping, tearing and other tests of metallic and non-metallic materials, such as thermal insulation materials, waterproof rolls, geotextiles, wires and cables, pipe ring stiffness, rubber, plastic, etc. Can implement GB, ISO, JIS,DIN, ASTM and other test standards, and according to user needs to edit the test software. It is a necessary testing instrument for quality inspection units, scientific research departments, colleges and universities, industrial and mining enterprises.
2、standard of execution
GB 2611-2007
JJG139-1999
GB/T 16491-2008
3、Product features
（1） Host:：
1-1 full digital ac servo motor and servo driver, speed ratio up to 1:100,000; High control precision, good stability, the system running stable and reliable, fast response, low noise, and has overload, overcurrent, overvoltage, undervoltage, overheating, exceptions, stop, fault alarm and so on complete protection function, and can be adjusted according to different types of models and test parameters, make the servo system running in the best state, use the position servo system control mode, the interface unit to realize the digitization, overcomes the speed loop of zero drift and low speed instability.
1-2 precise ball screw and precise reduction mechanism are adopted for transmission, which is stable, low noise and no clearance.
（2） control：
2-1 automatic zero setting: after the test begins, the measurement system automatically sets zero;
2-2 automatic stop: after the sample is fractured, the moving beam will stop automatically;
2-3 automatic calibration: the system can automatically calibrate the display accuracy;
2-4 automatic storage: automatic storage of test data and test conditions to prevent data loss caused by forgetting to store;
2-5automatic transmission: during the test, the moving speed of the beam can be changed automatically according to the preset program or manually.
2-6 automatic control: test speed, displacement, strain and other closed-loop control methods can be selected according to test requirements;
2-7program control: users can customize multi-step control program according to certain programming specifications.
2-8 automatic saving: at the end of the test, the test data and curves are automatically saved;
2-9 batch test: for samples with the same parameters, one set can be used to complete a batch of tests successively;
2-10 automatic analysis: automatic analysis of test data according to relevant standards and requirements.
2-11 curve traversal: after the test is completed, the curve can be analyzed and the corresponding data of each point on the test curve can be found with the mouse;
2-12 curve selection: stress-strain, force-displacement, force-time, displacement-time and other curves can be selected as required for display and printing; And can clearly reflect the failure process of the sample under the action of tension and the data analysis of each point of the sample.
2-13 automatic analysis: any segment on the test curve can be used for local amplification analysis.
2.14 batch processing: summarize and compare multiple test data and curves, display and print.
2-15 test report: multiple report editing methods (ExselWorld advanced customization), users can edit the report format according to their needs
2.16 limit protection: it has two kinds of limit protection: program-controlled and mechanical;
2-17 overload protection: when the load exceeds the rated value of 2% ~ 10%, automatic shutdown;
2-18 LAN connection: data interface is retained to connect directly to the integrated information management network of the laboratory。
